MULTI VOLT(36V) Cordless Rotary Hammer with Dust Extractor System DH36DPB
MULTI VOLT(36V) Cordless Rotary Hammer with Dust Extractor System & Quick-release Tool Retainer DH36DPD

  • Cordless Rotary Hammer with Dust Extractor System:DH36DPB

    DH36DPB

  • Cordless Rotary Hammer with Dust Extractor System & Quick-release Tool Retainer:DH36DPD

    DH36DPD

Fast Drilling Speed Equivalent to an Electric (AC) Model*1

Drills fast like an AC rotary hammer with a combination of the highly efficient brushless motor and high power output MULTI VOLT battery.

  • Runtime per Charge
    Approx. 90 holes *2
    With the BSL36A18 battery. When drilling into concrete with a ΓΈ8.5mm x 40mm drill bit.

  1. When fully charged with the dust extractor system detached. In comparison with the DH28PCY rotary hammer. The performance depends on the workpiece material and operating conditions.
  2. The value is for reference purposes, and depends on the workpiece material and operating conditions.

More Lightweight and More Compact *1 Same Power. Less Size.

  • The compact and lightweight MULTI VOLT battery enables a significant reduction in the overall size of the tools.

  1. Compared to the DH36DBL cordless rotary hammer.
  2. Without the dust extractor system, the DH36DPB has the same weight and size as the DH36DPA.

Ergonomic Design

  • Pic.1: The grip of the handle and the drill bit head are on the same line of action, which makes applying force to drill easier.
    Pic.2: The grip of the handle is close to the center of gravity for easier handling.

    Ergonomic Design

Reactive Force Control(RFC)

When the tool bit is suddenly overburdened during operation, the slip clutch works or the tool's built-in controller stops the motor's output before the entire tool jerks.

Caution
Depending on operating conditions, the Reactive Force Control function may not work or may not provide the specified performance. Make sure that the workpiece is placed and supported properly, and that the main unit is held firmly during operation.

Fast Drilling Speed Equivalent to an Electric (AC) Model *1

  • allows for fast change between the SDS-plus drill bit holder and the drill chuck holder (DH36DPD).

    Note: Turn the change lever to "Hammering only" mode when replacing a tool retainer with another. Use the machine only in "Rotation only" mode when the drill chuck holder installed.

    Quick-release tool retainer
  • Dust Extractor System

    HEPA filter

    High-Efficiency Particulate Air filter ensures clean air exhaust.

    HEPA filter

    Drilling Depth Adjustment up to 85mm

    Max drilling depth: 85mm
    Max Stroke: 100mm

    Drilling Depth Adjustment

    Detachable Dust Box for Easy Dust Disposal

    Detachable Dust Box

    The Brush Cap and Nozzle Seal for Minimum Dust Escape

    Brush Cap and Nozzle Seal

    Delayed Stop Function

    When the tool's switch is released, the dust extractor system's internal motor stops after a delay of several seconds so as to vacuum remaining dust particles in the internal parts.

    Cross Platform Compatibility

    The dust extractor system included with the DH36DPB fits on the DH36DPA, DH36DBL, and DH18DBL.
    The one included with the DH36DPD fits on the DH36DPC, DH36DBQL, and DH18DBQL.

Specifications

Model G3610DB G3613DB
Capacity Concrete 20mm (25/32")
Bit Shank SDS-plus
Battery Voltage 36V
No Load Speed 0 - 1,100/min
Full Load Impact Rate 0 - 4,300/min
Overall Length 493mm (19-13/32") 525mm (20-43/64")
Weight*3 5.7kg (12.6lbs.) 6.1kg (13.4lbs.)
Vibration Total Values (triax vector sum)*4 Hammer Drilling into Concrete Vibration emission value ah, HD = 15.4 m/s2 Vibration emission value ah, HD = 16.2 m/s2
Uncertainty K = 1.5 m/s2
Standard Accessories*5 2 Batteries (BSL36A18), Battery Cover, Charger (UC18YSL3), Side Handle, Depth Gauge, Terminal Cover, Carrying Case 2 Batteries (BSL36A18), Battery Cover, Drill Chuck Holder, Charger (UC18YSL3), Side Handle, Depth Gauge, Terminal Cover, Carrying Case
  1. Specifications are for when a dust extraction unit has been installed. When used with the dust extraction unit uninstalled, the specifications are the same as those for DH36DPA.
  2. Specifications are for when a dust extraction unit has been installed. When used with the dust extraction unit uninstalled, the specifications are the same as those for DH36DPC.
  3. Weight according to EPTA-Procedure 01/2003.
  4. The vibration total values were determined according to EN60745.
  5. Supplied accessories vary by country or area.

Optional Accessories

Dust Extractor System

Code No. For Model
402933 DH18DBL
DH36DBL
402934 DH18DBQL
DH36DBGL

Dust Extractor System

Part Name Code No.
Filter 370520
Dust Box Set (Filter included) 370518
Nozzle Seal 370494
Brush Cap 370496