MULTI VOLT(36V) Cordless Rotary Hammer DH3640DA

MULTI VOLT

DH3640DA

  • The stopper and wing bolt are not included as standard accessories in all regions and countries.
  • MV
  • Brushless motor
  • UVP
  • RFC
  • SDS max
Specifications and others

Lightweight and Class-leading Drilling and Demolishing performance*1

The lightest Rotary Hammer in its class (0.5 kg lighter than the current model*2) allows for increased maneuverability and less user fatigue.
Delivers powerful impact energy of 9.2J*3 for 17% faster drilling speed and 35% higher demolishing performance than the current model*2.

  1. As of July 1 2023, among 40mm class cordless rotary hammers made by leading power tool manufacturers. (Survey by Koki Holdings)
  2. Compared with HiKOKI DH36DMA.
  3. Impact energy according to EPTA-Procedure.

New Low Vibration Mechanism and Low Vibration Handle

  • 17% lower vibration than the current model*

    The new dynamic vibration absorber and low vibration handle significantly reduce vibrations for less user fatigue and improved operability.

    • Compared with HiKOKI DH36DMA.

Convenient Continuous Operation Function(only available for Hammering mode)

  • Continuous operation button keeps the tool operating even after the trigger switch is released, for less fatigue when chiseling for extended periods.

    Continuous operation button

Bright LED Light

A high-brightness LED Illuminates the spot you are working on and turns off 10 seconds after releasing the trigger switch.

  • Reactive Force ControlAgainst Sudden Overburdening

    RFC logo

    When the tool bit is suddenly overburdened during operation, the slip clutch works or the built-in controller stops the motor output before the entire tool jerks.

    Caution
    Depending on the operating conditions, the Reactive Force Control function may not work or provide the specified performance. Please make sure that the workpiece is placed and supported properly, and that the main unit is held firmly during operation.
    RFC explanatory illustration

4-Step Push Button Rotation Speed Selection

  • Four power levels of impact and rotation speed to match versatile applications and improve productivity.

    Rotation Speed Selector Switch
Display Lamp
No Load Rotation Speed 250/min 340/min 420/min 500/min
Full Load Impact Rate 1,400/min 1,900/min 2,350/min 2,800/min

Performance per Charge*

Work Ah Performance per Charge*
Concrete Drilling
(60mm in Depth)		 ⌀19mm Drill Bit 4.0Ah
MULTI VOLT Battery		 Approx. 46 Holes per Charge
⌀25mm Drill Bit Approx. 26 Holes per Charge
⌀32mm Drill Bit Approx. 15 Holes per Charge
Concrete Demolishing Approx. 10.8 mins per Charge
  • The values are shown for reference purposes and may vary according to materials and conditions.

Specifications

Capacity Drill Bit 40mm
Core Bit 105mm
Battery Voltage 36V
Bit Shank SDS-max
No Load Rotation Speed 250 - 500/min
Full Load Impact Rate 1,400 - 2,800/min
Impact Energy*1 9.2J
Dimensions*2 (L x H x W) 499 x 262 x 107mm
Weight*3,4 7.4kg
Vibration Total Values
(triax vector sum) *5		 Hammer Drilling
into Concrete		 Vibration emission value ah, HD = 10.3m/s2
Uncertainty K = 2.7m/s2
Equivalent
Chiselling Value		 Vibration emission value ah, CHeq = 10.1m/s2
Uncertainty K = 2.3m/s2
Standard accessories*6 2 Batteries (BSL36B18X), Charger (UC18YSL3),
Side Handle, 2 Battery Covers, Grease, Carrying Case
  1. Impact energy according to EPTA-Procedure.
  2. With BSL36B18X battery attached.
  3. Weight includes the side handle and BSL36B18X battery.
  4. According to EPTA-Procedure 01/2014.
  5. The vibration total values were determined according to EN62841.
  6. Standard accessories vary by country or area.
  • Please contact local dealers for product availability and product details.