Cordless Rotary Hammers DH18DBL / DH18DBQL

  • DH18DBL Cordless Rotary Hammers

    DH18DBL

  • DH18DBQL Cordless Rotary Hammers

    DH18DBQL

WARNINGCAUTION REGARDING LITHIUM-ION BATTERY TRANSPORTATION

More durability. Longer motor life. Maintenance-free.

  • The brushless motor offers a significantly extended product life cycle by eliminating trouble including armature burnout, layer short or commutator wear even in severe work environments. Besides, no carbon brush replacement is required.

    Brushless MotorBrushless Motor

Top-Class *1 Capabilities

  • The highly efficient brushless motor and the optimized hammering mechanism achieves the top-class*1 drilling speed (up to 40% faster *2,3) and demolition performance (up to 4.6kg / 5min.*3).

    1. As of April 2016. Among 18V cordless rotary hammers made by leading power tool manufacturers (surveyed by Koki Holdings.)
    2. A comparison between DH18DBL/DH18DBQL and the previous model DH18DSL.
    3. The actual value may vary according to the hardness of the concrete and other operational conditions.
    Drilling Speed: Up to 40% Faster, Demolition Performance: Up to 4.6kg / 5mins More

Improved Handling

Pic.1: The grip of the handle and the drill bit head are on the same line of action, which makes applying force to the drill easier.
Pic.2: The grip of the handle is close to the center of gravity for easier handling.

Improved handling

Top-Class Runtime *1

  • Number of 40mm deep holes drilled into concrete with a ø 8.5 drill bit
    18V: Up to 170 holes per charge

    1. As of April 2016. Among 18V cordless rotary hammers made by leading power tool manufactures (surveyed by Koki Holdings.)
    2. Included batteries vary by country or area.

Reactive Force Control(RFC)

  • Reactive Force Control Logo

    When the tool bit is suddenly overburdened during operation, the slip clutch works or the tool's built-in controller stops the motor's output before the entire tool jerks.

Caution
Depending on operating conditions, the Reactive Force Control function may not work or may not provide the specified performance. Make sure that the workpiece is placed and supported properly, and that the main unit is held firmly during operation.

Convenient Carrying Case

  • The rotary hammer can be stored in the case with the side handle attached.

    Image of Convenient carrying case

Quick-Release Tool Retainer

allows for fast change between the SDS-plus drill bit holder and the drill chuck holder (DH18DBQL only).

Quick-release tool retainer

Note : Turn the change lever to "Hammering only" mode when replacing a tool retainer with another.
Use the machine only in "Rotation only" mode when the drill chuck holder installed.

Multiple Bit-Angle Settings

  • The chisel can be rotated in multiple angles with the change lever positioned at 'neutral'.

    Multiple bit-angle settings

Fast Charging offered by Our original charging technology

Built-in cooling system of the UC18YSL3 charger drastically reduces charging time by efficiently cooling both the battery and charger at the same time during charging.

Charging time is 6.0Ah Approx. 38mins, 5.0Ah Approx. 32mins.
  • Included batteries vary by country or area.

Other features of the UC18YSL3 charger

- Large charge indicator lamp with 4 color LED status lights
- USB port (5V 2A)
- Low-temperature charge (-10º and above)

CAUTION REGARDING LITHIUM-ION BATTERY TRANSPORTATIONCAUTION
REGARDING LITHIUM-ION BATTERY
TRANSPORTATION

Notify the transporting company that a package contains a lithium-ion battery, inform the company of its power output and follow the instructions of the transportation company when arranging transport.

  • Lithium-ion batteries that exceed a power output of 100Wh are considered to be in the freight classification of Dangerous Goods and will require special application procedures.
  • For transportation abroad, you must comply with international law and the rules and regulations of the destination country.

Dust Extractor System

Part Name Dust Extractor System for DH18DBL Dust Extractor System for DH18DBQL
Code No. 402933 402934
Voltage For use with 18V or 36V
(depending on the voltage specifications of tool to which it is attached)
Max. Airflow 0.35 m3/min
Dust Box Capacity 0.3L
Max. Stroke 100mm (3-15/16")
Max. Hole-Drilling Depth 85mm (3-11/32")
Diameter of Drill 4.3 - 20mm (11/64 - 25/32")
Max.Length of Drill (effective length) 50 - 100mm (1-31/32 - 3-15/16")
Dimensions (W x H x D) 90 x 306 x 378mm
(3-35/64 x 12-3/64 x 1/8")
90 x 306 x 411mm
(3-35/64 x 12-3/64 x 16-3/16")
Weight 1.8kg (4.0lbs.)
Dust Extractor System

Specifications

Model DH18DBL DH18DBQL
Capacity Concrete 26mm (1")
Steel 13mm (1/2")
Wood 27mm (1-1/16")
Bit Shank SDS-plus
Battery Voltage 18V
Power Output 90Wh for BSL1850
54Wh for BSL1830
108Wh for BSL1860
90Wh for BSL1850
54Wh for BSL1830
No Load Speed 0 - 1,050/min
Full Load Impact Rate 0 - 3,950/min
Overall Length 351mm (13-13/16") 384mm (15-1/8")
Weight *1 3.7kg (8.2lbs.) 4.0kg (8.8lbs.)
Vibration Total Values
(triax vector sum) *2
Hammer drilling into concrete Vibration emission value ah,
HD = 17.5 m/s2
Vibration emission value ah,
HD = 19.0 m/s2
Uncertainty K = 1.5 m/s2
Equivalent chiseling value Vibration emission value ah,
CHeq = 8.6 m/s2
Vibration emission value ah,
CHeq = 12.3 m/s2
Uncertainty K = 1.5 m/s2
Standard Accessories 2 Batteries (BSL1850 or BSL1830) *3, Charger (UC18YFSL), Side Handle, Depth Gauge, Battery Cover, Carrying Case Drill Chuck Holder, 2 Batteries (BSL1860, BSL1850 or BSL1830) *3, Charger (UC18YFSL or UC18YSL3), Side Handle, Depth Gauge, Battery Cover, Carrying Case
  1. Weight according to EPTA-Procedure 01/2003.
  2. The vibration total values were determined according to EN60745.
  3. Included batteries vary by country or area.