MULTI VOLT(36V) Cordless Impact Wrench WR36DE

MULTI VOLT
MULTI VOLT(36V) Cordless Impact Wrench WR36DE
  • MV
  • Brushless Motor
  • Sq=12.7mm

Powerful, Best-in-Class*1 Torque Easy to Use, Compact & Lightweight Design

  • WR36DE

    Max. Torque 770Nm*2
    Weight 2.6kg

    WR18DSHL

    Max. Torque 480Nm*3
    Weight 3.4kg

    WR36DE is 95mm shorter in length than WR18DSHL.
  1. As of May 2021, among 36V cordless impact wrenches made by leading power tool manufacturers. (Survey by Koki Holdings)
  2. When tightening an M24 high-tension bolt (grade 10.9) for 10 seconds with a hexagonal socket.
  3. When tightening an M22 high-tension bolt (F10T) for 10 seconds with a hexagonal socket.

Best in Class*1 Speed Helps You Get the Job Done Faster

  • Speed Comparison*2

    Time needed to loosen an M24 (grade 10.9) bolt tightened at 850Nm

    WR36DE can tighten a bolt about 4.5 times faster than WR18DSHL.

    Time needed to loosen an M27 (F10T) bolt tightened at 1,050Nm

    WR36DE was loosened in about 5.1 seconds, but WR18DSHL took 15 seconds to loosen.
  1. As of May 2021, among 36V cordless impact wrenches made by leading power tool manufacturers. (Survey by Koki Holdings)
  2. The values shown are for reference purposes and may vary according to the workpiece materials and other operating conditions.

Auto Stop Modes Prevent Over-tightening

The tool comes with four Auto-Stop modes for a variety of applications and will stop after a preset amount of time has passed to prevent over-tightening of bolts.

1 2 3 4
Display Lamp Display Lamp 1 Display Lamp 2 Display Lamp 3 Display Lamp 4
Rotation Speed 1,500/min 1,800/min 2,100/min 2,400/min
Auto Stop Time Approx. 0.5 sec. Approx. 1.0 sec. Approx. 1.5 sec. Approx. 2.0 sec.
Use Pre-tightening of wheel nuts or pipes Pre-tightening bolts
in steel frame assembly
Pre-tightening bolts
on heavy machinery / bridges

The correct tightening torque depends on the material, size and class of the bolt. Make a test fastening to adjust the mode setting to suit the bolt.

IP56 Dust and Water Resistant*  

IP56

Thanks to the unique design of dust-protective cooling windows and fully plastic coating on some important inner parts, this product conforms to IP56 protection class ratings (dust and water resistance) for electrical equipment as stipulated by the international IEC regulations.

  • The equipment has been designed to withstand the effects of dust and water, but there is no guarantee that it will not malfunction. Do not use or leave the equipment in locations where it is subject to excessive amounts of dust, or in locations where it is submerged in water or subject to rainwater. (Only the main unit conforms to the IP56 protection class ratings when equipped with a battery.)

Runtime per Charge*

Work Ah Runtime per Charge*
Tightening bolts
(1.5 sec. per bolt)
M16 x 55 (F10T) 2.5Ah Approx. 240 Bolts
  • The values shown are for reference purposes and may vary according to the workpiece materials and other operating conditions.

Specifications

Capacity Ordinary Bolt M10 - M24
High Tension Bolt M10 – M20
Squire Drive 12.7mm
Tightening Torque 770Nm
Nut Busting Torgue 1,050Nm
Battery Voltage 36V
No Load Speed 4 0 – 2,400/min
3 0 – 2,100/min
2 0 – 1,800/min
1 0 – 1,500/min
Impact Rate 4 0 – 3,400/min
3 0 – 3,000/min
2 0 – 2,600/min
1 0 – 2,200/min
Overall Length 169mm
Weight*1 2.6kg (with BSL36A18)
2.9kg (with BSL36B18)*2
Standard Accessories*3 2 Batteries (BSL36A18), Charger (UC18YSL3),
Carrying Case, Battery Cover
  1. According to EPTA-Procedure 01/2014.
  2. Sold separately.
  3. Standard accessories vary by country or area.
PDF: 445KB
  • Please contact local dealers for product availability and product details.