MULTI VOLT(36V) Cordless Portable Rebar Cutter/Bender VB3616DA

MULTI VOLT(36V)banner
VB3616DA

Cuts & Bends - It Does Both

  • World’s 1st* Cordless Rebar Cutter/Bender - Freedom to Work Anywhere

    • The world’s first cordless rebar cutter/bender, as of October 2019. (Survey by Koki Holdings)
    Cuts & Bends - It Does Both
    Image of exterior construction and housing foundation construction

    For exterior construction and house foundation work

Cutting

  • One or More at Once
    ø10mm : 2 Rebars
    ø13mm : 1 Rebar
    ø16mm : 1 Rebar

    Image of cutting one ø16mm rebar
    Image of cutting two ø10mm rebars at the same time

Bending

  • One or More at Once
    ø10mm : 3 Rebars
    ø13mm : 2 Rebars
    ø16mm : 1 Rebar

    Image of bending one ø16mm rebar
    Image of bending three ø10mm rebars at the same time
  • Dial Setting of the Bending Angle
    With the turn of a pre-set dial, bends can be made in variety of angles.

    Dial Setting of the Bending Angle

Fine Adjustment of the Bending Angle

  • Variable Speed Switch Trigger
    The switch trigger allows manual adjustment of the rebar angle based on your visual estimation.

    Reverse Rotation Mode
    You can also reverse the bending roller by pulling the trigger, which makes it easy to remove bent rebars or check bending angles.

    Variable Speed Switch Trigger and Reverse Rotation Mode

Runtime per Charge(Using the BSL 36A18 battery)

  ø10mm / SD 295* ø13mm / SD 295* ø16mm / SD 345*
Cutting Approx. 350 Cuts
(2 cuts at a time)
Approx. 170 Cuts Approx. 130 Cuts
Bending (90°) Approx. 630 Bends
(3 bends at a time)
Approx. 310 Bends
(2 bends at a time)
Approx. 140 Bends
  • “SD345” and “SD295” are material designations of JIS (Japanese Industrial Standards). The figures are for reference only because applicable rebar standard is different depending on the area.
    SD345: yield strength between 345N/mm2 and 440N/mm2
    SD295A: over 295N/mm2 yield strength, 440 to 600N/mm2 tensile strength
    SD295B: 295 to 390N/mm2 yield strength, over 440N/mm2 tensile strength

Specifications

Battery Voltage*1 36V
Capacity Material Rebar
Bar Dia. ø8 - 16mm
Size (Length x Width x Height) 510 x 230 x 241mm
Weight*2 18.6kg (BSL36A18)
19.2kg (BSL36B18)
Standard Accessories 2 Batteries (BSL36A18), Charger (UC18YSL3),
Cutter Set, Wrench, Battery Covers, Carrying Case
  • Carrying Case
  1. Existing batteries (BSL3660/3620/3626, BSL18xx series, etc.) cannot be used with this tool.
  2. According to EPTA-Procedure 01/2014.
PDF: 675KB