100mm Electronic Disc Grinder G10BYEQ2
- Available in APAC only.
High Power
Max Output 1,900W
- For 220V, 230V and 240V
Durability to Withstand Rough Jobsite Conditions
Heavy-Duty Motor
The motor redesigned with new components allows increased durability.
Long Lasting Controller with Four Times* More Dust Resistance
The electronic controller is insulated and protected against metallic dust.
- Vs. HiKOKI's G10VE disc grinder. The value shown is for reference purposes and may vary according to the workpiece materials and other operating conditions.
Dust Resistant Filter
The fine mesh filter of the air inlet drastically increases the dust resistance.
Standard Accessory
Fine Mesh Dust Filter
Maintenance-Free and Highly Efficient AC Brushless Motor
Longer Lifetime*1
The AC brushless motor offers a significantly extended product life cycle by eliminating trouble including armature burnout, layer short or commutator wear even in severe work environments.
Maintenance-Free
No carbon brush replacement is required, which saves time and cost.
Stable Operation during Voltage Drop
The performance isn't affected as much by voltage drop from long extension cords on site. This vastly improves electrical efficiency.
Excellent Grinding Performance with Less Fluctuation in Speed*1
The highly efficient AC brushless motor and electronic speed control maintains the speed and ensures work efficiency even when the load increases.
- Compared with HiKOKI brushed disc grinders.
- Use an extension cord no longer than 50m.
Ergonomic Design
-
Small Grip Circumference
For more comfort and control
- G13VE2 shown for illustration purposes only.
-
'Continue To Run' Function*
Even after the motor has stopped due to overloading, it gets activated automatically if the load decreases within 1.5 seconds, so users do not have to restart the tool manually.
- The motor may not automatically restart when the kick-back protection is activated or for other safety reasons. In that case, the tool needs to be turned off and on manually.
-
3 Position Side Handle
Fitting the side handle on top of the tool allows for easy operation in tight spaces.
Great Safety Features
-
Kickback Protection System
Monitors a sudden drop in the motor rotation speed and stops the motor quickly to reduce the reaction force (kickback).
Depending on operating conditions, the Kickback Protection System may not work or provide specified performance. Make sure that the workpiece is placed and supported properly, and that the main unit is held firmly during operation. Additionally, carefully read "KICKBACK AND RELATED WARNINGS" in the instruction manual. -
Restart Protection
The motor does not restart after the power has been temporarily cut off during operation to avoid accidents.
-
Soft Start
Allows comfortable operation by reducing the reaction force on start up.
-
Electronic Brake
Stops the wheel within seconds when the trigger is released, so users can get back to work quickly without wasting time waiting around for the wheel to slow down. The brake is also applied in case of unintentional disconnection of the power cord.
Use only the wheel washer supplied. -
Paddle Switch
Stops the wheel when released. For even more safety, the paddle switch cannot be pulled unless the lock-off lever is pushed down.
Specifications
| Capacity | Wheel Dia. | 100mm |
|---|---|---|
| Hole Dia. | 16mm | |
| Thickness | 6mm | |
| Spindle Thread | M10 x 1.5 | |
| Power Input | 1,320W | |
| Max Power Output | 1,900W | |
| No Load Speed | 10,000/min | |
| Overall Length | 309mm | |
| Weight*1 | 1.9kg | |
| Standard Accessories*2 | Wheel Guard, Side Handle, Wrench | |
- Weight: according to EPTA-Procedure 01/2014.
- Standard accessories vary by country or area.
- Please contact local dealers for product availability and product details.