SafetyDouble-Insulation power tool, indicated by the double square mark(), can be operated without external grounding. All HiKOKI power tools are designed and manufactured considering safety and usability. HiKOKI power tools are provided with various safety features like brakes, covers and clutches.Power inputHiKOKI power tools employ series motors whose modern design isbased on our many years of experience. Unless otherwise indicated in the catalogue, power input (Watt) is based on 110V to 240V.General precautions1. Read and follow handling instructions provided with the power tool and comply with all the operating instructions and warnings.2. Never let children use the power tool.3. Keep others, especially children, away from the tool.4. Wear eye protector to protect the eyes.5. Never touch blades or cutters during operation.6. Avoid unintentional contact with the power switch when the tool is connected to a power source.7. To ensure proper function of the tool, DO NOT remove installed covers or screws. DO NOT modify components and parts.8. Prior to operation, carefully inspect the tool to ensure all the parts properly functioning.9. Immediately stop operation if abnormalities are noted.10. Ensure that motor ventilation opening is kept fully open.11. Always keep the blades and cutters sharp and clean.12. Have the power tool inspected at a proper regular interval by an authorized Service Center.13. Maintain the proper care and cleanliness of the power tool.14. Consult an authorised Service Center for repair and/or part replacement.15. DO NOT use the power tool for any other application than those specied in the handling instructions.16. DO NOT use the tool for work beyond its prescribed capability.17. To avoid possible electric shock, DO NOT use the power tool in wet areas.18. Ensure that the applied voltage is the same as that specied on the nameplate.19. Ensure that electric plug is plugged into a matching receptacle hat is properly installed and grounded in accordance with the instruction manual, all applicable local codes, and ordinances, except for double insulated tools.20. Ensure that the power supply is disconnected after operation.21. DO NOT lift the power tool with the cord or remove the plug from the receptacle by pulling the cord.22. Always handle the power tool with care.23. Proper posture is essential for safe operation.24. Dress properly and work in proper clothing and shoes.25. Always keep the work area in good order.26. When not in use, store the power tool.27. DO NOT stare into LASER beam.GuaranteeThe primary concern of Koki Holdings is the convenienceand satisfaction of the customer. To this end, each HiKOKI powertool is carefully tested and inspected, and is guaranteed againstany defects in workmanship and materials. Defects inworkmanship and materials – not attributable to wear and tear,overloading, abusive treatment, unauthorised modication orcareless handling — will be repaired or replaced without charge.Notes for the international catalogue1. Koki Holdings reserves the right to change specications of parts and accessories of HiKOKI power tools without notice.2. Specications, features, accessories and parts such as power input, maximum torque, cutting capacity, length, weight brake, hook, spindle thread, chuck, blade, bore and handle, may vary from country to country.3. Figures of battery capacity are nominal values.4. Standard accessories such as battery, charger, grinding wheel, sanding paper, blade, washer, collet chuck, chuck sleeve, side handle, dust collection adapter, protective items, wrench and carrying case, sometimes may vary from country to country. Some of standard accessories may be excluded from country to country.5. Please state required voltage and specications when you order.6. Orders are subject to product-availability in each country.7. Some models in this catalog are shown with optional accessories and fasteners such as screw, nail, bit, socket, blade, battery and grinding wheel.8. Actual colours of products may differ from those in printed photos of this catalog.IconsDouble Insulation Electronic Constant Speed Control Electronic SoftStart Control Variable Speed 2-speed GearReversibleSlip ClutchOrbital Cutting ActionRandom Orbit ActionSpindle Lock Multi-Speed SettingsBrake Brake Shock-AbsorbingHandle TypeBlower FunctionDust Extracting TypeWhite LED LampSDS max ShankSDS-plus ShankHex ShankHex ShankDeep Cut7Power tools catalogue 2023 - 2024
元のページ ../index.html#7